9 tips for using a burner

By DD 2019-12-04 16:29:10

　　The following points should be noted when using the burner:

　　1.In case of continuous failure of the secondary ignition program of the gas burner, it shall stop the machine to check whether the gas supply system of the burner is normal and whether the circuit connection is correct. Only after the fault is removed can the burner be restarted.

　　2.It is forbidden to strike or rub the air supply pipeline with wrench or metal rod to avoid causing static electricity or spark and causing gas explosion.

　　3.Smoking, welding, cutting and other illegal operations are strictly prohibited in the air supply valve set or the flange face of the pipeline.

　　4.It is strictly forbidden to conduct any open fire test near the pipeline and valve group and pressure regulating valve to avoid serious accidents.

　　5.Test whether there is fuel in the air supply line, usually with a gas low pressure meter test.

　　6.In the air supply pipeline, is the empty, but there are residual gas or liquid droplets on the wall, such as electrostatic spark and open fire will also cause combustion and explosion.

　　7.When the air supply pipeline is ventilated and the valve set is in trouble, it is necessary to remove it. First, the front front main valve of the valve set must be cut off, and then the gas in the pipeline from the main valve to the valve set should be emptied, before the disassembly and maintenance of the valve set can be carried out.

　　8.In debugging, gas must be serious, safe and efficient.

　　9.No explosion-proof electric power tools are allowed on site.

　　At present, the traditional fossil fuels such as coal, oil and natural gas have brought many problems such as environmental pollution and greenhouse effect to human beings.

　　There are many petrochemical and chlorine-alkali enterprises in China. Many petrochemical and methanol hydrogen production enterprises will produce a large amount of industrial tail gas with hydrogen content of 50%~60% or even more than 90%, which is called hydrogen-rich tail gas.

　　Hydrogen - rich tail gas is flammable, explosive, large, difficult to transport, and contains certain harmful organic matter, direct emission of environmental pollution;Treatment and utilization of hydrogen-rich tail gas is not only conducive to environmental protection, but also can save energy and reduce costs, thus improving the economic benefits of enterprises.

　　In generalized burner concept, domestic water heater, gas range, and even cigarette lighter can be considered as a burner.The way it works, a burner can be defined as a device that converts matter into heat by means of a chemical reaction called combustion -- that is, mixing air and fuel in a proper proportion through a premix unit so that it burns adequately.Burners can be classified according to their different properties.According to fuel mode, divided into: fuel oil burner, gas burner, light oil burner and dual fuel burner.Among them: in the specific application, fuel oil burner will be divided into light oil burner, heavy oil burner, etc.Gas burner is divided into natural gas burner, city gas burner and so on.According to the combustion control mode of the burner, it is divided into single-stage burner, double-stage burner and proportionally adjusted burner.According to fuel atomization mode, it can be divided into mechanical atomizer burner and medium atomizer burner.According to the structure is divided into: integral burner and split burner.The split burner is mainly used in industrial production, which is mainly characterized by the decomposition and installation of combustion system, air supply system, control system, etc. The machine is mainly suitable for large equipment or high temperature and other special working environment., in contrast, commercial use of the burner for mass, manufacture and market specialization degree requirements in the supply chain is not high, the product's market price are relatively cheap, and split type burner for professional requirements are relatively high, and most need professional installation team, marketing sales price is much higher compared to the same.

　　Quiet

　　The newly developed backflow hood type muffler and S-shaped air supply system have greatly decreased the noise level during burner operation. By replacing the traditional external muffler, it is able to offer a quiet environment.

　　After decades of development, EBICO is beginning to enter a critical period of second entrepreneurship.In the face of the changing market, tide business sea, only firm faith, never give up, forge ahead, constantly beyond, can stand the tide.In the future, we will continue to adhere to the safety, energy saving and environmental protection features of EBICO burner, and build EBICO into a value-added brand that leads the market, exceeds the budget and contributes to the society.

　　New energy enterprises are not only the direct beneficiaries of clean energy consumption, but also important participants, bearing important responsibilities.Participate in the spot power market and auxiliary service market, improve the system dispatching ability in a market-oriented way, and promote the consumption of clean energy.