By CC 2019-12-06 08:26:09
Research and explore a variety of energy joint scheduling.To study the joint optimization operation of thermal power and renewable energy on a pilot basis, and explore the formation of a joint dispatching unit for renewable energy power stations and thermal power plants.The joint dispatching unit is regarded as participating in the power market as a whole and accepting the instructions of the grid dispatching agency.In areas where hydropower is the main source of wind power and photovoltaic power, and in areas where wind power and photovoltaic power are developed simultaneously, pilot joint dispatching units that prevent coordinated operation of multiple power sources by region can be explored.We will encourage new nuclear power projects to build peak-regulating power supplies, such as pumped storage, in combination with local conditions.
EBICO EBS... series burner is the fourth generation of cpmpact type and electronic proportional control digital burner researched and development specially for asphalt mixing plant equipment. This burner is designed according to the three major ideas of European products on safety, environmental protection and saving energy, as well as special environment and fuel requirements of China market. It is a new generation of advanced intelligent electronic proportional control machine which is launched to the market after being approved by lots of test and qualified data. This model is scientific and rational in design, compact in size, complete in structure and low in failure rate. Through the application of many new technologies, it can save 5%~12% fuel and at most about 40% electrical energy; it is an ideal product suitable for both fixed asphalt mixing plant and mobile asphalt mixing plant.
Many projects to increase the flue gas external circulation, according to the on-site reaction, the flue gas recirculated condensed water is a lot, in winter, the wind duct will even freeze.This is because the hot and humid smoke and combustion fresh air mixed, mixed steam beyond the mixed air temperature of the saturated humidity, the excess steam formed condensed water.CO2 in the flue gas will dissolve in the condensed water. If the acidic condensed water enters the burner or fan, it will easily corrode the components of the burner or fan.Measures must be taken to prevent condensation from entering the burner or fan.Add heat preservation for recirculating smoke pipe, reserve condensate water outlet, fresh air and preheat.
Condensate water discharge device shall be set at the lowest point of each section of the circulation flue. If there is a mixing bellows, condensate water discharge device shall be set on the mixing bellows. If necessary, condensate water discharge device may also be set on the fan.Condensate water discharge device recommended made of water seal type, the highest point of the water seal lower than the lowest point of the flue gas pipeline, for the convenience of condensate water discharge.
Fuel more intelligent control system, adopt international famous brand PLC as the core controller, according to different fuels, the choice of different control procedures, to realize the automatic ignition, automatic flame-out protection system, automatic adjustment, automatic wind load and coal proportion adjustment of oil and gas, combustion fault automatic monitoring alarm, can implement chain and equipment protection, at the same time, the control system can also be used with equipment integration for an organic whole, to realize automatic equipment operation parameters setting and burner operation parameters matching, improve overall equipment automatic control effect.
After decades of development, EBICO is beginning to enter a critical period of second entrepreneurship.In the face of the changing market, tide business sea, only firm faith, never give up, forge ahead, constantly beyond, can stand the tide.In the future, we will continue to adhere to the safety, energy saving and environmental protection features of EBICO burner, and build EBICO into a value-added brand that leads the market, exceeds the budget and contributes to the society.
In terms of comprehensive energy saving, the equipment belongs to the basic hardware of energy saving, but more importantly, it is the human factor. A good management team can control every link with good people, calculate every energy saving factor carefully in the operation, and constantly summarize and improve the management and control level of the team. This is software.And a company attaches great importance to the energy-saving management operation, not only attaches importance to the construction of hardware, attach more importance to the construction of the software, they generally supporting more advanced computer control system, using the global advanced instruments have been supervised, maximize the gain actual operational data, through the computer system constantly improve, constantly upgrade technology, artificial intelligence will be the face of management thinking into a computer program, using new technology to the automatic control of each node, reduce the human error, omission, precise control of boiler system always run in high efficiency and energy saving state, so,A comprehensive, reasonable and advanced computer control system is the best assistant tool for human management.
Energy saving is a comprehensive project, each node should be controlled, which requires the enterprise to invest a lot of manpower and material resources. The enterprise will constantly improve its management level, and at the same time, it will continue to reap the results of energy saving and consumption reduction, and create better economic benefits.