By DD 2019-12-20 08:30:33
9 tips for using a burner
The following points should be noted when using the burner:
1.In case of continuous failure of the secondary ignition program of the gas burner, it shall stop the machine to check whether the gas supply system of the burner is normal and whether the circuit connection is correct. Only after the fault is removed can the burner be restarted.
2.It is forbidden to strike or rub the air supply pipeline with wrench or metal rod to avoid causing static electricity or spark and causing gas explosion.
3.Smoking, welding, cutting and other illegal operations are strictly prohibited in the air supply valve set or the flange face of the pipeline.
4.It is strictly forbidden to conduct any open fire test near the pipeline and valve group and pressure regulating valve to avoid serious accidents.
5.Test whether there is fuel in the air supply line, usually with a gas low pressure meter test.
6.In the air supply pipeline, is the empty, but there are residual gas or liquid droplets on the wall, such as electrostatic spark and open fire will also cause combustion and explosion.
7.When the air supply pipeline is ventilated and the valve set is in trouble, it is necessary to remove it. First, the front front main valve of the valve set must be cut off, and then the gas in the pipeline from the main valve to the valve set should be emptied, before the disassembly and maintenance of the valve set can be carried out.
8.In debugging, gas must be serious, safe and efficient.
9.No explosion-proof electric power tools are allowed on site.
A burner is a thermal energy device that converts chemical energy into heat energy and controls and regulates the process of fuel combustion and conversion.The earliest burners in use in the world date back to the middle of the 19th century, when gas was used as an industrial fuel.In the mid-19th century, people reacted air or steam with coal, coke or charcoal at high temperature to make an artificial gas with low calorific value. This artificial gas was mainly made of carbon monoxide and hydrogen, while others, such as carbon dioxide and nitrogen, were very high in content.
Different gas pressure regulating valve sets provided by EBICO can be designed and matched separately according to different projects. The general supply includes manual globe valve, filter, pressure regulating valve, expansion joint and pressure gauge. The gas pressure regulating valve sets have the characteristics of keeping pressure stable and cleaning gas.
Quiet
The newly developed backflow hood type muffler and S-shaped air supply system have greatly decreased the noise level during burner operation. By replacing the traditional external muffler, it is able to offer a quiet environment.
Enough about how to solve the trouble of burner
Clean energy consumption and utilization is a systematic problem involving power supply, power grid and power load.At present, the consumption of clean energy in China is mainly faced with the following difficulties: first, the reverse distribution of resources and demand. Most of the landscape resources are distributed in the "three north" region, while the water energy resources are mainly concentrated in the southwest region, while the power load is mainly concentrated in the central, eastern and southern regions.Second, the rapid development of clean energy does not match the growth rate of electricity consumption in recent years. In recent years, with the active support of national policies, the installed capacity of clean energy, especially wind power and photovoltaic power generation, has maintained a fast growth rate, far exceeding the growth rate of electricity consumption of the whole society.Third, the processing of wind power and photovoltaic power generation is affected by natural conditions, and there are relatively large fluctuations. After large-scale grid connection, it brings great challenges to power system dispatching and operation.At present, China's power system is not fully adapted to such a large scale of volatile new energy access.