By Jackie 2019-11-30 13:21:30
Research and explore a variety of energy joint scheduling.To study the joint optimization operation of thermal power and renewable energy on a pilot basis, and explore the formation of a joint dispatching unit for renewable energy power stations and thermal power plants.The joint dispatching unit is regarded as participating in the power market as a whole and accepting the instructions of the grid dispatching agency.In areas where hydropower is the main source of wind power and photovoltaic power, and in areas where wind power and photovoltaic power are developed simultaneously, pilot joint dispatching units that prevent coordinated operation of multiple power sources by region can be explored.We will encourage new nuclear power projects to build peak-regulating power supplies, such as pumped storage, in combination with local conditions.
The frequent occurrence of major climate disasters in the world in 2012 is the result of mankind's increasingly profound understanding of the destructive effects of climate warming.Climate warming is caused by the uncontrolled use of fossil fuels by human beings, which increases the carbon dioxide content in the atmosphere year by year, strengthens the greenhouse effect and destroys the laws of atmospheric circulation.Now the world is exploring new energy sources to replace fossil energy and scientific ways of industrial production and application. Solar energy, wind energy and nuclear energy have been developed and utilized practically.However, the development and utilization technology of biomass industrial energy is just beginning and will last a long time.
Biomass energy comes from solar energy and CO2in the atmosphere. Plants absorb CO2and sunlight in the atmosphere during their growth and synthesize various organic substances, some of which are used by animals to form animal energy.When the organisms and their products are burned, they release energy and at the same time release the absorbed CO2into the atmosphere in equal amount.For the global atmosphere system, the CO2increment of this energy use to the atmosphere is zero, which is called carbon zero emission.There is a huge amount of biomass fuel on earth. If fully utilized, it will play an important role in reducing CO2emissions.The development, research and utilization of solid, liquid and gaseous fuels of plant straw are under development.
The "medium pressure air-tumber" atomized burner developed for burning straw oil has good applicability not only to straw oil, but also to bio-oil and petroleum oil.This kind of burners can be used to realize the normal combustion of heavy asphaltene and colloid and inferior oil with high density.
Quiet
The newly developed backflow hood type muffler and S-shaped air supply system have greatly decreased the noise level during burner operation. By replacing the traditional external muffler, it is able to offer a quiet environment.
From the perspective of heat transfer calculation, the measures to reduce the smoke exhaust temperature are analyzed from the following aspects: increasing the heat exchange surface, improving the heat exchange efficiency of the heating surface, improving the heat exchange temperature difference by using a lower temperature source, and reducing the influence of corrosion on the heat exchange efficiency.As gas boiler host first meet the low nitrogen flame furnace volume and size requirements, the second host of convection heating surface is a main export in order to reduce the smoke temperature, general control in 150 ~ 250 ° C, in order to avoid the smoke temperature increases along with the flue design difficulty of heat preservation, high smoking temperature is too low will cause corrosion in furnace convection heating surface forming wall condensation, therefore, furnace domestic demand to design proper heating surface, the physical dimension more representative chamber size.Increasing the heat exchange surface should mainly consider increasing the heat exchange area of the equipment in the rear of the boiler, which is more favorable for rapidly reducing the exhaust temperature.The second is to have a lower inlet water temperature can be used for heat exchange temperature difference characteristics;Third, corrosion resistant materials can be used to improve its service life.The new structure of efficient heat exchange mainly adopts the form of staggered tube arrangement, efficient heat exchange finned tube, plate heat exchanger, etc., to increase the flue gas disturbance and contact surface, reduce the heat resistance of flue gas stratification, and improve the heat exchange efficiency of medium and flue gas.
For more information about combustion engine, please pay attention to wuxi shunmeng technology co., LTD.
Contact number: 0086-510-85169858
Website is: www.boiler-special-burner.com
Company address: building 48, henghua science and technology park, no.58 xiuxi road, wuxi city, jiangsu province, China