During the shutdown of the burner in summer:

By CC 2019-12-05 17:14:42

　　Basic knowledge of combustion engine maintenance

　　Basic knowledge of burner maintenance:

　　1. Keep boiler furnace clean and ensure air circulation in boiler room.When disassembling the burner, the inspection switch should be cut off first.

　　2. When the door is locked tightly, the door shall be unshaken and secure;

　　3. It is prohibited to burn paper and garbage with the boiler without special declaration;

　　4. The gas inlet pressure shall not exceed the maximum allowable pressure of the valve set indicated on the burner nameplate;

　　5. Keep the surroundings of the burner clean, so as not to absorb debris into the burner.

　　When the combustion engine is started, it must be guaranteed that:

　　1. The check switch is on, check the continuous phase;

　　2. The valves on the air supply pipeline and the heating system pipeline are open;

　　3. The gas pressure is within the pressure range required by the burner;

　　4. The regulating plate in the boiler flue must be open (if installed);

　　If the burner does not start:

　　1. Check whether the valve on the air supply pipe has been opened;

　　2. Close the start button and check the setting position of the thermostat, but do not adjust the inside of the thermostat;Check if the fuse is blown.

　　Combustion engine does not burn after ignition:

　　1. Master the starting condition of the combustion engine, but it is absolutely not allowed to start the combustion engine forcibly;

　　2. Do not reignite the burner before the residual gas in the boiler is exhausted;

　　3. If the burner has been unable to ignite, professional personnel should be asked to solve.

　　During the shutdown of the burner in summer:

　　1. Cut off the main inspection and the valve on the natural gas pipeline, if the combustion engine should be repaired in a short time.

　　2. Note that the newly installed chimney must be checked whether it is firm when the burner is working, and no vibration or other abnormalities shall occur;

　　3. Whether the newly used ignition device can ignite the gas;

　　4. If the ignition failure of the combustion engine requires restart, it must wait for about 10 minutes or so, until the residual gas in the furnace dissipates before restart the combustion.Multiple ignition is strictly prohibited.

　　5. When the boiler is started and ignited, it is strictly prohibited for all personnel to stay in the front and back of the boiler.

　　The frequent occurrence of major climate disasters in the world in 2012 is the result of mankind's increasingly profound understanding of the destructive effects of climate warming.Climate warming is caused by the uncontrolled use of fossil fuels by human beings, which increases the carbon dioxide content in the atmosphere year by year, strengthens the greenhouse effect and destroys the laws of atmospheric circulation.Now the world is exploring new energy sources to replace fossil energy and scientific ways of industrial production and application. Solar energy, wind energy and nuclear energy have been developed and utilized practically.However, the development and utilization technology of biomass industrial energy is just beginning and will last a long time.

　　Biomass energy comes from solar energy and CO2in the atmosphere. Plants absorb CO2and sunlight in the atmosphere during their growth and synthesize various organic substances, some of which are used by animals to form animal energy.When the organisms and their products are burned, they release energy and at the same time release the absorbed CO2into the atmosphere in equal amount.For the global atmosphere system, the CO2increment of this energy use to the atmosphere is zero, which is called carbon zero emission.There is a huge amount of biomass fuel on earth. If fully utilized, it will play an important role in reducing CO2emissions.The development, research and utilization of solid, liquid and gaseous fuels of plant straw are under development.

　　All-in-one structure is applied, and the mounting flange is articulated, so it is featured in simple structure, easy and quick operation and maintenance. It is especially applicable for the thermal oil furnace for asphalt heating, the drying drum of the movable mixing plant, the drying drum of the small-sized fixed asphalt mixing plant and other heating equipment under severe conditions; its power is 134kW~1,0714kW. This burner is suitable for various of fuels: light oil, oil mixture, heavy/residual oil, gas, oil/gas. Compressed air or steam is used as the atomizing medium of the fuel series burner; thus, only 2~5kg oil pump pressure is required. It is especially applicable for the site with complicated fuels.

　　Safe

　　Common language symbol, high accuracy intelligent control device, digital intelligent program controller, information feedback and remote transmitting, human-computer interface conversation, quick information reading and understanding barrier-free processing, anticorrosive and heat resistant burning front end, combined air valve, high and low pressure monitoring of EBICO form dual-core safe control.

　　Energy saving

　　Streamline arc design reduces wind resistance and consumption power of the whole machine largely; S-shaped turbocharger technology enhances anti-resistance ability, so as to adapt to various of hearth; the combination of combustion optimization and intelligent control makes sure approximately 100% combustion efficiency and saves plenty of fuel. The abstract analog frequency control can save up to 70% starting power, and about 40% starting power can be saved every year averagely. 1.5% O2 precise control technology improves energy efficiency largely

　　Environmental protection

　　EBICO patent technologies, including multiple air distribution, multiple gas distribution and central premixing technology, minimize NOx and CO emission. Circular oblique flow inlet air, frequency control design and broadband control technology (optional) reduce about 30% noise.

　　Intelligent

　　Intelligent program controller, digital manipulator, electronic load regulator, frequency regulator(optional),the supported external communication Modbus485 and Profibus-DP can upload controlled data, realize network communication and remote communication, and form accurate and intelligent central control of EBICO.

　　Compact size

　　It feautres compact streamline design,electrical device and control module skid-mounting, small size, sufficient output power, low electric power, easy malign-ance and installation.

　　Quiet

　　The newly developed wide air-intake muffler and S-shaped air supply system have greatly decr-eased the noise level during burner operation. By replacing the traditional external muffler, it is able to offer a quiet environment.

　　Maintenance

　　The ES series features very simple maintenance due to the design of a door on the top of burner’s body and control box respectively. The maintenance can be easily made by opening the door. Such fast and high-efficiency performance contributes to the experience during the design of EBICO integration module system.

safe

　　After decades of development, EBICO is beginning to enter a critical period of second entrepreneurship.In the face of the changing market, tide business sea, only firm faith, never give up, forge ahead, constantly beyond, can stand the tide.In the future, we will continue to adhere to the safety, energy saving and environmental protection features of EBICO burner, and build EBICO into a value-added brand that leads the market, exceeds the budget and contributes to the society.

　　For more information about combustion engine, please pay attention to wuxi shunmeng technology co., LTD.

　　Contact number: 0086-510-85169858

　　Website is: www.boiler-special-burner.com

　　Company address: building 48, henghua science and technology park, no.58 xiuxi road, wuxi city, jiangsu province, China